Generator Maintenance at 250 / 500 / 1000 Hours — Full Checklist
A genset serviced on hours can run for tens of thousands of hours. One left until it breaks usually fails at the worst possible moment.
Daily / before start
- Engine oil and coolant level
- Fuel level and leaks around the unit
- Battery voltage and terminal condition
- Nothing blocking ventilation
Every 250 hours (or 6 months)
- Change engine oil and oil filter
- Change fuel filter and water separator
- Clean the air filter
- Inspect belts, hoses and clamps
- Run on load and record parameters
Every 500 hours
- Everything from 250 hours
- Replace the air filter
- Inspect and clean the radiator
- Check alternator, AVR and panel connections
- Check valve clearance per the engine manual
Every 1000 hours / annually
- Everything from 500 hours
- Replace coolant to specification
- 100% load test with performance recorded
- Inspect exhaust system and anti-vibration mounts
- Calibrate protections and function-test ATS/AMF
Rarely used standby sets
A standby genset still needs a 30-minute on-load run at least monthly. Idle machines fail precisely because they rarely run: fuel degrades, batteries drop and seals dry out. Hospitals and data centres also need an annual staged load test for audit purposes.
Maintenance contracts
Our service team covers scheduled maintenance from service points in Indonesia's major cities, with service vans carrying parts and instruments to site. Message us on WhatsApp for scheduling and annual contract scope.
