Silent or Open Type Genset? Choosing by Site Condition
Silent is not always better, and open type is not the cheap option. Site, environmental permits and who can hear it decide the answer.
Open type: when it makes sense
Open type suits gensets installed in a properly designed enclosed genset room with acoustic treatment, adequate ventilation and ducted exhaust. Maintenance access is easier and the unit costs less. Factories, industrial estates and mine power houses normally use open type.
Silent type: when it is required
A silent canopy at 65–75 dB(A) @7m is needed when the genset sits outdoors or near noise-sensitive areas: hotels, hospitals, malls, housing, schools and government buildings. Hospitals and upscale hotels often ask for the 58–65 dB(A) super silent option.
Containerised: no genset room available
On mines, road projects and remote sites, a 20 or 40 ft container combines genset room, acoustic treatment and fuel tank in one relocatable unit.
Check the noise permit
Local authorities may set noise limits for residential and commercial zones. Measure the site baseline, and make sure the canopy figure a vendor promises is quoted at the same distance (normally 7 m). We measure noise at commissioning and hand over the result with the test report.
