Genset + Solar + Battery Hybrids: Cutting Fuel Cost at Remote Sites
At mines, island resorts and telecom sites, fuel can cost more than the genset itself within a few years. Hybrids attack that cost, not the unit price.
The genset price is not the problem
For a site running 24 hours, the biggest costs are fuel and the logistics of delivering it, plus running hours that pull overhaul forward. Cutting running hours cuts both at once.
How a hybrid works
Solar covers daytime load. The battery stores the surplus and carries night-time and light loads — the point where a genset runs below 30% capacity, which is both inefficient and hard on the engine. The genset starts only at high load or low state of charge, and always runs near its optimum.
What to measure before design
- Hourly load profile over at least one week
- Actual fuel consumption per kWh, not brochure figures
- Roof or ground area available for PV
- Delivered diesel price including logistics
- Critical loads that cannot drop for a second
Savings numbers
Fuel savings of 20–40% are commonly reported for hybrid configurations, but the real figure depends heavily on load profile and the size of the PV and battery. We would rather calculate it from your load data than promise a percentage up front.
Where to start
Send us your load data or monthly fuel bills. Our engineering team will simulate genset + PV + BESS configurations with a payback estimate, then prepare a quotation that can be executed in phases.
